Repairs to uPVC Windows
uPVC windows are a fantastic option for modern homes. They are long-lasting, durable and easy to maintain. In contrast to aluminium and timber, they are not susceptible to corrosion or rot.
Cleaning and lubricating regularly UPVC windows and doors is essential. This will help avoid unnecessary repair costs as well as improve the efficiency of energy.
1. Broken Glass
The damaged glass in your windows can cause significant damage to your home, and could even be fatal. You should take the time to ensure that your windows are in good shape.
Single-pane windows are relatively easy to replace, and they generally fit into frames that were previously in use very easily. If you have double-paned windows which are held together by internal beading, it is harder to remove and replace the panes that were previously in use. In this instance, it is necessary to purchase plastic spacers in order to help the new pane fit into the window frame.
If you plan to attempt to remove the window panes yourself, it is essential to wear appropriate safety gear, including thick gloves and eye protection. You should also lay down a dropcloth before you begin working on the window panes, so that any shards fall onto the fabric and not on the floor, where they could be trampled.
Once the glass is removed, it's a good idea to cover the gap with clear packaging tape or duct tape to prevent water and drafts from getting into the home until a professional comes out and fix the window. It also acts as a barrier that will prevent any intruders from getting access to your home. If the distance between the door and the window is significant, you may prefer an alarm system that includes windows. This will give you the best of both.
2. Sagging
uPVC is durable, energy-efficient and affordable alternative to timber sash windows. However, with time, they may be afflicted by a variety of issues like sagging. A sagging uPVC window could cause issues with light, draughts and even security. If you find that your uPVC window is beginning to shrink, it's crucial to act fast to stop the issue from worsening.
To fix a window that is sagging you can try to reposition the hinges. First, you'll need to unblock the windows to reach the frame. Then, remove both the top and bottom hinges with a screwdriver and adjust the hinges clockwise or counter-clockwise. Close your window to check the fit after having relocated your hinges. If you are happy with the fit of the window, you can tighten screws to secure them in the right position.
If you aren't able to move the hinges you may require replacing the seal. Rubber seals can dry out and lose their elasticity with time, which causes them to lose their tightness. It is crucial to replace your seal as quickly as you can to ensure that your uPVC window watertight and draughtproof.
UPVC handles can also loosen. This is often caused by screws that have been removed over time, but it could also be caused by the handle mechanism wearing out. It's a good thing that it's simple to repair the handle of a window that is loose yourself. First, you'll need close the window and perform an initial test fit. The corner joints of the sash should align with the casing joint. If it does not, you can use the screwdriver to loosen up the handle. Then, turn the mechanism to position.
3. Water Leaks
If you awake to damp floors and mouldy walls each time it rains it is important that you take action. Water leaks through windows can cause structural damage to your home and also hinder your ability to control the temperature inside your home. Most of the time, uPVC window leaks are caused by damaged or missing sealant.
This is an easy fix that can be completed by any DIYer who has the ability. Depending on how severe the issue is, old caulking may have to be removed. When it comes to uPVC repair, it is important to avoid over-caulking. This can make your window harder to clean and decrease its energy efficiency.
Make sure that the drainage holes do not have debris in them, and also ensure that the sill pan has been website properly angled to drain away from the window. In more serious situations, you might need to consider replacing the window.
Mold spots and rotten sills are other signs of water leakage. This fungus thrives under damp conditions and can spread quickly throughout the home.
It is also important to note that if the leakage originates from the glass of your double-glazed windows it may be more likely to be an issue with the glass seal rather than the frame or sagging. Again this can easily be repaired by more info a uPVC window expert who can replace the glass seal and regain the full insulation properties of your windows.
4. Faulty Hinges
If your uPVC windows are stiff to open, or loose and open with a breeze, it may be the hinges that are at the fault. They can be easily repaired by any DIYer who is skilled and are usually completed in just a few minutes.
Most households in the UK will have top-hung or side hung uPVC windows that are hinged and, like all mechanical parts, they will wear out over time. It's easy to replace a hinge on a window, but it's easier if someone helps you to hold the frame.
Make sure that the uPVC hinges are open and closed in the correct direction. You can check this by looking for the arrows on each hinge. This indicates which way the window should be opened.
The problem can be caused by opening the window incorrectly or a faulty installation at the factory. Sending us a picture through our website can often solve the issue. We are always happy to give assistance.
Regular lubrication of the hinges is also necessary. Applying a light engineering lubricant to the hinges is a good method to accomplish this. We suggest using a lubricant that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It also helps prevent corrosion and reduce the possibility of sticking. This should be done at least every year. WD40 and other solvent based fluids are not recommended since they will damage parts of your uPVC window.
5. Draughts
Draughts can be caused by several different causes. The hinges, also due to wear and tear may become displaced, which can cause an opening to appear where the sash meets the frame. If they are beyond repair, it could be necessary to get them re-aligned. click here In addition, the interlock could be unbalanced. This is located on the hinge's side, and might require to be cleaned. In certain more info instances it might be necessary to replace the hinges.
The seals may wear out or be damaged over time, allowing air to escape. Replacing these with high-quality weatherstripping can help prevent draughts. Replace the windows made of Upvc with low-emissivity glasses. This will help regulate indoor temperatures and decrease the possibility of draughts.
Another method of reducing the amount of draughts is to use a Draught-exclusion device. These are typically fabric tubes filled with a filler that can be put website on top of your window sill. They can help keep cold air out and keep your home warm and cozy!
With a little maintenance and repairs, your upvc windows will provide an excellent level of insulation and security for your home. It is crucial to keep in mind that all windows will eventually wear out and it may be cheaper to replace them than to repair them. If you are experiencing issues with your upvc window it is recommended to speak with a professional immediately.